New Holland C237
Features
READY FOR THE FARM, RENTAL YARD AND CONSTRUCTION SITE
The NEW C237 is a vertical lift compact track loader that provides exceptional lift capacity with an efficient 74 horsepower engine. Lift more hay bales, haul heavier pallets and bigger boulders with greater breakout force and 3,700 lbs of rated operating capacity (50% ROC).
Lift more on the farm or the jobsite
– 74 HP engine
– 3,700-lb rated operating capacity @ 50% tipping load (7,400-lb tipping load)
– Long track base of 64.5 inches (17.7-inch wide tracks)
– Low ground pressure of 4.3 psi
– Strong bucket tip and lift breakout forces of 7,360 lbs and 6,110 lbs respectively with 78-inch dirt and foundry bucket
Super Boom® vertical lift design
The C237 design is optimized for lift and carry operations. The patented New Holland Super Boom® vertical lift linkage offers more height and reach which allows operators to load material into the center of high-sided truck boxes or hoppers.
Heavy-duty construction
The C237 is built with a heavy-duty steel rear door, steel rear hood, and NEW steel front work lights with side lamps for extra visibility during nighttime operation.
Specifications
| Manufacturer/model | FPT/ F5BFL463A*F001 |
| Bore/stroke, in (mm) | 3.9 x 4.3 (99 x 110) |
| Displacement, in3 (L) | 207.5 (3.4) |
| Fuel injection | HPCR Direct |
| Air intake | Turbocharged Aftercooled with external EGR |
| Horsepower per SAE J1349 Gross hp (kW) | 74 (55) @ 2,500 rpm |
| Horsepower per SAE J1349 Net hp (kW) | 68 (51) @ 2,500 rpm |
| Peak torque, lb-ft (Nm) | 232 (314) @ 1,400 rpm |
| Travel speed, low range, mph (km/h) | 5.1 (8.2) |
| Travel speed, high range (optional), mph (km/h) | 8.0 (12.9) |
| Height to | ||
| Bucket hinge pin, in (mm) | 131.6 (3.34 m) | |
| Top of ROPS, in (mm) | 80.4 (2.04 m) | |
| Bottom of level bucket, fully raised, in (mm) | 124.8 (3.17 m) | |
| Overall length without attachment with coupler, in (mm) | 117.9 (3.0 m) | |
| Dump angle, degrees | 53.5 | |
| Dump reach (max height), in (mm) | 35.1 (0.80 m) @ 45.0 degrees | |
| Rollback, bucket on ground, degrees | 34.2 | |
| Rollback, bucket at full height, degrees | 86.0 | |
| Track on ground, in (mm) | 64.5 (1.64 m) | |
| Ground clearance (bottom of belly pan), in (mm) | 9.5 (0.24 m) | |
| Angle of departure, degrees | 32.0 | |
| Clearance circle without bucket, in (mm) | 58.5 (1.49 m) | |
| Clearance circle rear, in (mm) | 67.0 (1.70 m) | |
| Overall width, in (mm) | 76.0 (1.93 m) | |
| Ground pressure, PSI (with spec belt) | 4.2 psi (29 kPa) | |
| Pump flow, gpm (Lpm) | 24.2 (91.5) |
| Optional high flow, gpm (Lpm) | 37.6 (142.5) |
| Relief pressure, psi (bar) | 3,046 (210) |
| Rated operating load, 50% tip, lbs (kg) | 3,700 (1678) |
| Rated operating load, 35% tip, lbs (kg) | 2,590 (1178) |
| Tipping load, lbs (kg) | 7,400 (3357) |
| Breakout force, lift cylinder, lbs (kN) | 6,292 (28.0) |
| Breakout force, bucket cylinder, lbs (kN) | 8,776 (39) |
| Operating weight, lbs (kg) | Unit equipped w/ open cab; 165 lb operator; 78 in Heavy Duty bucket; full of fuel: 9,945 (4510) |
